Hello,

our chillispot won't work anymore after wunderfull wlan hotspot service for months.
- I'cant ping the chillispot IP from the commandline inside (ssh) ddwrt.
- chilli.conf is there and settings are the same like in the webinterface from ddwrt.
- local dhcp server (ddwrtLinksys) is offline. The ddwrt ist set to router.

here are our settings we set bei ourselves, all others are default:

SETUP

Basic Setup

wan is set to disabled

ip from ddwrt is set to 10.x.x.2
netmask is set to /24
gateway is set to 10.x.x.1
dns is set to 10.x.x.1

wan port is assinged to the switch
local dhcp (linksys ddwrt) offline
dnsmasq for dhcp and dns is set to disabled
dhcp authoritive is set to disabled

Advanced Routing

Operating mode ist set to Router

VLans

Vlan0 1 2 3 4 > set and assigned to Bridge > LAN
Vlan1 W > set and assigned to Bridge > LAN

Wireless ist set to LAN

Networking

br0 >> vlan0 eth1 vlan1

WIRELESS

everything default

SERVICES

Hotspot

Chillisopt enable

Seperate Wifi from LAN Brigde disabled

Prim. Radius Server set to our external root Server IP, outside the company with radius installed, also our konfig. website for authentification
Secon. Radius Server empty
DNS IP is set to our Lancom Router serving the Internet connectoin 10.x.x.1
Remote Network 10.x.x.128/25 (this means .129 is the chillispot and .130-.253 is the dhcp range from the chillispot)
Redireckt URL is set to our login site for the authentification
Shared Key is set
DHCP interface is set to LAN
Radius NASID is set
UAM secret is set
UAM allowed is set

ADMINISTRATION

Keep Alive ist set to reboot daily

sshd is enabled to connect local to the ddwrt

This are all settings we changed. with this settings this hotspot works fine for months. now if i connect to the ddwrt via ssh i can't ping 10.x.x.129 (chilli). And we don't receive IP's to our clients from chilli if try to connect.